Design, layout and installation of the rail system is crucial in producing a patient lifting system that operates optimally to lift and move users.
Guldmann rail systems are designed to ensure that the hoist moves quietly, smoothly and with a minimum of friction, using as little power as possible.
You can install Guldmann rail systems virtually anywhere, attached to ceilings or walls, or free-standing and into virtually any type of building.
Set up single track to cover a complete room or throughout any space you choose.
Opt for unsupported spans of up to 8 metres, which helps keep the interior space attractive and uncluttered.
Made of lightweight aluminium and assembled as modules, Guldmann rail systems are easy to transport, lift and install.
Guldmann rail systems consist of an extensive range of modular units, components and fittings that you can put together in multiple ways, so the system meets your exact needs and fits your surroundings. Modular design means you can alter and extend as needs change.
All components are made of corrosion resistant materials and are surface-treated so you can use them in rooms where it’s wet or humid.
Guldmann Rail System Components
There are three different types of GH3 rails: A, B and C each specially designed to tackle particular spans and lifting weights. Combining these appropriately makes installation an easy, rapid process.
The rails can be mounted on the ceiling, on walls or on supporting pillars – or any combination of these. The unsupported span can be as much as eight metres, depending on the combination of rail types specified and which weights the system must be capable of bearing.
It is possible to build in the rails in rooms with suspended ceilings, so that only the lower side of the rail is visible, both in connection with single track and room-covering systems.
If the rails are mounted on the ceiling itself, they can be made to blend discreetly into the surroundings by use of colour or decoration.
A-rails are normally used in single track systems, as curves (30˚, 45˚, 60˚, 90˚), switch tracks and turntables are the same height as the A-rail.
The traverse rail can be intermediately hung or underhung.
GH Turntable, electric
A turntable is used where it is necessary to lead the rail system in different directions.
Max capacity: 250 kg
GH Switch track, electric
Switch tracks must be installed in places where it is necessary to lead the rail in different directions. The switch tracks are operated electrically. Max capacity 250 kg.
Switch track available in
- 60˚ electric, left
- 60˚ electric, right
- 90˚ electric, left
- 90˚ electric, right