CuroCell® A4 is available in five variants:
CuroCell® A4 OP10: 10 cm overlay mattress up to 160 kg
CuroCell® A4 CX10: 10 cm overlay mattress up to 200 kg
CuroCell® A4 CX15: 15 cm replacement mattress up to 200 kg
CuroCell® A4 CX16: 16 cm replacement mattress up to 200 kg
CuroCell® A4 CX20: 20 cm replacement mattress up to 250 kg
The CuroCell® A4 mattress system has three program modes: Pulsation, Alternating and CLP (constant low pressure/static).
With the new pulsation program, the pressure in the mattress cells alternates between two-thirds and one-third pressure, the idea being to provide gentler pressure relief for the user. CuroCell® A4 is delivered with pulsation mode as the default setting. CuroCell® A4 also has alternating and CLP (constant low pressure) program modes.
The pulsation mode is highly efficient and appreciated by users. Based on positive feedback as well as relevant research, the pulsation mode is the default setting. Choice of mode is simply performed by the touch of a button and should always be based on the user’s status.
All the mattresses are made of materials that meet the healthcare sector’s demands on hygiene, safety and quality. The mattresses are designed to allow the user excellent comfort, minimize the effects of shearing forces and provide a good microclimate. The polyurethane air cells entails lower noise levels and greater comfort. The air in the cells is reused in the alternations, thus reducing electricity consumption and noise, and improving micro climate for the user. If the mattress should temporarily lose its power supply, the air remains inside.
The pump automatically optimizes the settings for the user of the mattress. No manual setting is required. The engineering further reduce noise levels, and cause less movement in the mattress. The result is a quiet, pleasant environment with a high level of comfort, where the system itself is barely noticeable.
3 Therapies in 1 – Alternating Mode | Pulsating Mode | Constant Low Pressure Mode providing flexibility to meet the complex needs of a wide range of the most compromised patients in one system.
Auto Response Technology – Detects Change | Monitors Change | Re-adjusts Zone Pressure by adjusting pressure to optimise patient safety & comfort.
Profile Auto Adjust – During Alternating Mode as bed is profiled the pump automatically defaults to pulsate mode to mitigate the risk associated with potential high inflation pressures.
Anti Shear Technology – Advanced low friction properties reduce the risk of potential shear forces including heel drag.
Heel Shield – 6 narrow lower height cells providing a gentle slope to optimise pressure offload in the vulnerable heel area.
Active Transport Facility – Unplug and go! Self-seal technology supports patient for up to 8 hours during transfer.
No Minimum Weight – Flexibility to meet the needs of low weight and paediatric patients.
Cell on Cell with Sub Base – Patient safety is assured with a cell on cell construction and mattress sub base which is sealed when power is lost preventing the mattress from “bottoming out”
Multi – Stretch Vapour Permeable Cover – Reducing friction and maintaining patient micro climate. Interaction with the low friction layer reduces sheer forces and heel drag.
Digital Pump Technology – Intuitive digital pump design facilitates ease of use and minimizes training requirements.
Optional Cycle Times – Flexibility to meet the requirements of individual patients with 10 / 15 / 20 / 25-minute cycle time options.
Comfort Control – Pressure can be increased to tailor to individual patient preferences without compromising safety & care.
Max Firm mode – Timed (20 minutes) firm surface for patient transfer & care procedures.
Audible & Visual Alarm – If Patient Safety is compromised the pump will alarm and indicate the source of the problem e.g. power failure. If muted, after 5 minutes if the problem has not been resolved audible alarm will recommence.
Pack & Go – After use, simply activate the mattress deflate function ready for transportation or storage.
Whisper Quiet Pump – Minimising patient disruption.
Practical Electrical Safety – 12 Volt power adaptor, quick release power lead & cable management system ensure electrical safety.
CPR – Highly visible, one hand operation, located on the pump to facilitate rapid deflation in medical emergencies.